The top has a medium-thick consistency and spreads evenly over the surface. After curing, it does not require wiping, helps level the nail surface and supports the creation of a clean, even light reflection.

The formula is designed to maintain a stable glossy finish: when used correctly, the coating should not become dull, crack, chip or yellow. The top is used as the final step of the fast Soft Gel Tips extension system, which uses pre-shaped, lightly satin acrylic tips to create natural-looking extended nails.

• Consistency: medium-thick.
• Color: clear.
• Finish: high gloss.
• No dispersion layer.
• No wiping required after curing.
• Helps level the nail surface.
• Helps create an even light reflection.
• Does not become dull.
• Does not crack.
• Does not chip.
• Does not yellow.
• Designed for finishing the Soft Gel Tips system.

Curing:

• Led lamp 48 W: 60 seconds.

Removal:

• With a nail file or electric nail drill.
• The complete Soft Gel Tips enhancement can also be removed with acetone.

How to use:

Preparing the natural nail plate:

1. Prepare the nail plate: shape the nail, lightly mattify the surface and clean it.
2. Using a brush with excess product removed and avoiding the skin, apply Prep Tips for Degreasing to the nails. Leave until fully evaporated for approximately 30 seconds.
3. Apply a thin layer of Primer Tips Acid Free to the prepared and degreased nail plate and wait approximately 30 seconds. For problematic nail plates, use an acid primer.

Selecting and preparing the tips:

1. Select the required shape and size of Soft Gel Tips so that the tip completely covers the natural nail plate, including the side areas.
2. Degrease the underside of every fitted tip with Prep Tips for Degreasing. Leave until fully evaporated for approximately 30 seconds.
3. Apply Primer Tips Acid Free to the degreased underside of each tip and wait approximately 30 seconds.

Application:

1. Apply a thin layer of Gel Tips Strong Foundation to the natural nail plate and to the underside of the fitted tip. Do not cure.
2. Place the tip onto the nail plate near the proximal nail fold and press it towards the free edge to remove trapped air.
3. While continuously pressing the tip against the nail plate, pre-cure under a 3 W Led lamp for 10 seconds.
4. Cure all 5 nails in a Uv/Led lamp at 48 W for 60 seconds.
5. Remove excess product from the top and underside of the tip with an alcohol-based liquid.
6. Correct the shape of the free edge.
7. Refine the tips around the nail folds using a file or electric nail drill.
8. Mattify the entire surface of the tips with a buffer and remove all dust.
9. Apply 2 thin coats of the selected gel polish and cure each coat.
10. Apply Top Tips No Wipe and cure for 60 seconds.

It is recommended to apply Gel Tips Strong Foundation to both surfaces — the natural nail and the underside of the tip. If necessary, the product may be applied only to the nail or only to the underside of the tip.

If a long tip shape is selected, it is recommended to reinforce it with a suitable builder product from any Victoria Vynn gel system.

Precautions:

• For professional use only.
• May cause an allergic reaction.
• Avoid contact with skin and eyes.
• Keep out of reach of children.
• Read the instructions for use carefully.
• Use only as intended.
• Do not use in case of hypersensitivity to any of the product ingredients.
• If an adverse reaction or signs of hypersensitivity occur, such as burning, itching, redness or similar symptoms, discontinue use and consult a doctor.
• Use only on a healthy and non-weakened nail plate.

Contraindications:

• Diseases or pathological changes of the nail plate.
• Inflammatory or allergic conditions.
• Injuries to the nails or surrounding tissues.
• Ingrown or pincer nails.
• Hypersensitivity to any of the product ingredients.

Ingredients: Acrylates Copolymer, Cellulose Acetate Butyrate, Hema, Pentaerythritol, Dimethicone, Bht.

The manufacturer may change the product composition. Information about the ingredients may be inaccurate.