The advanced acid-free formula contains fiberglass microfibres that form a reinforcing network within the material, helping improve resistance to cracks and breakage. The gel can be used on the natural nail plate as well as with forms, tips and dual forms, and it is suitable for building structure, correcting architecture and filling regrowth.

Its stable medium-thick consistency is not affected by ambient temperature, giving the technician consistent control during application. Self-levelling properties make the gel easier to distribute and support no-file and one-drop techniques, allowing durable yet visually slim nail enhancements to be created.

• Builder gel with a high concentration of fiberglass microfibres.
• Acid-free formula.
• Medium-thick, self-levelling consistency.
• Suitable for every nail plate type.
• Designed for building gel nails and reinforcing the natural nail plate.
• Suitable for structure correction and regrowth fills.
• Leaves a dispersion layer.
• Helps reinforce the natural nail plate.
• High resistance to cracking and breakage.
• Suitable for use with forms, tips and dual forms.
• Allows a natural-looking enhancement without mandatory use of coloured gel polish.
• Suitable for no-file and one-drop techniques.
• Does not react to changes in ambient temperature.
• Used as part of a three-phase system.

The gel cures in UV and LED lamps. With a 36 W UV/LED lamp, full curing takes 60 seconds. When creating the initial extension structure on a form, the material is flash-cured for 15–30 seconds.

The material is removed mechanically with a nail file or nail drill.

Ingredients: DI-HEMA TRIMETHYLHEXYL DICARBAMATE, URETHANE ACRYLATE OLIGOMER, HYDROXYPROPYL METHACRYLATE, SILICA DIMETHICONE SILYLATE, TRIPROPYLENE GLYCOL DIACRYLATE, METHYL BENZOYLFORMATE, CI 77491, CI 77891, CI 77266, GLASS, SILICA DIMETHYL SILYLATE, P-HYDROXYANISOL.

The manufacturer may change the product formulation. Information about the ingredients may be inaccurate.

How to use:

1. Prepare the natural nail plate: shape the nails, thoroughly mattify the surface, then clean and degrease it.
2. Apply NAIL PREP and wait approximately 30 seconds. Then apply TAPE BOND and wait another 30 seconds.
3. Apply a small amount of BOOST BASE, rub it into the nail plate with a gel brush and cure for 60 seconds.
4. Trim the nail form and fit it precisely under the free edge.
5. Apply a small amount of EASY FIBER GEL onto the form, create the extension structure and cure for 15–30 seconds. Remove the form.
6. Apply a second layer of EASY FIBER GEL, build the apex and shape the nail architecture. Cure for 60 seconds.
7. Wipe with an alcohol-based liquid, correct the shape with a file if necessary, mattify, clean and degrease the surface.
8. Complete the chosen nail design and apply a suitable gel polish top coat.
9. BOOST BASE may be replaced with MEGA BASE or BUILD GEL Base.
10. Always apply only a small amount of base and rub it thoroughly into the nail plate.
11. If required, apply the chosen coloured gel polish and cure each layer according to the instructions for that product.

Safety precautions:

• For professional use only.
• The product may cause an allergic reaction.
• Avoid contact with skin and eyes.
• Keep out of reach of children.
• Read the instructions carefully before use.
• Use the product only for its intended purpose.
• Do not use in case of hypersensitivity to any of the product ingredients.
• If burning, itching, redness or other signs of an adverse reaction occur, discontinue use and consult a physician.
• Use only on a healthy and non-weakened nail plate.

Contraindications:

• Nail plate pathology.
• Inflammatory or allergic conditions.
• Injuries to the nails or surrounding tissues.
• Ingrown and tubular nails.
• Hypersensitivity to any of the product ingredients.