Its 42 kHz operating frequency creates intensive cavitation, helping loosen contaminants from the surface of items and reach narrow gaps, recesses, and other hard-to-access areas. This allows for more thorough cleaning without the need to mechanically work on every small section by hand.

The 1400 ml tank provides a practical balance between compact external dimensions and sufficient working space for cleaning most tools and small accessories. The inner tank is made of SUS304 stainless steel for regular use.

The cleaner is operated through a digital control panel with an LED display. Five preset timer cycles allow the cleaning time to be adjusted according to the type of item and the degree of contamination.

• Tank capacity: 1400 ml.
• Tank dimensions: 13.5 x 16.5 x 6.0 cm.
• Operating frequency: 42 kHz.
• Tank material: SUS304 stainless steel.
• Timer settings: 90, 180, 280, 380, and 480 seconds.
• Number of timer cycles: 5.
• Display: LED.
• Device dimensions: 23.0 x 18.0 x 16.0 cm.
• Weight: 1.75 kg.
• Power: 60 W at AC 100 V, 50/60 Hz.
• Power: 60 W at AC 100–120 V, 60 Hz.
• Power: 70 W at AC 220–240 V, 50 Hz.

Method of use:

1. Fill the tank with water, keeping the liquid level between the MIN and MAX markings.
2. Connect the device to the power supply. Once switched on, the cleaner automatically defaults to the 180-second cycle.
3. Press the ON button to start cleaning.
4. If required, select a different program with the SET button. Available cycles are 90, 180, 280, 380, and 480 seconds.
5. After the cycle is complete, remove the cleaned items and repeat the process if necessary.

Different cleaning methods can be used depending on the type of item and the level of contamination.

• General cleaning: use running water only, keeping the liquid level between the MIN and MAX markings. This method is suitable for routine everyday cleaning.
• Enhanced cleaning: for heavy or dried-on contamination, 5–10 ml of a suitable detergent or disinfecting solution can be added. According to the provided information, cleaning efficiency may increase by approximately 30%.
• Partial cleaning: longer or larger items can be cleaned in sections with the lid open, provided that the liquid level is monitored carefully and the process is carried out with caution.

Precautions:

• Do not operate the device without water. Running the tank empty may damage the ultrasonic transducer.
• The liquid level must always remain between the MIN and MAX markings.
• Do not place items with unstable or non-durable coloring into the tank.
• Do not use the cleaner for wood, leather, or fabric items.
• Do not place electronic devices in the tank unless they are waterproof.
• Do not use the cleaner for items made from natural tortoiseshell.
• When partially cleaning large items with the lid open, monitor the water level carefully and work with additional caution.