• Acid-free material.
• Has shock-absorbing properties and does not crack on impact.
• Medium consistency.
• Medium pigmentation helps cover the free edge.
• Suitable for no-file extension techniques.
• Suitable for extensions using upper forms.
• Does not cause a burning sensation in the lamp.
• Becomes thicker in cold temperatures and more fluid in warmth.
• Thixotropic: the material becomes more fluid when moved with a brush during application.
• The gel can be additionally warmed to achieve a more fluid consistency.
• The material is hard at a thickness of 1 mm. At a thickness below 1 mm, it may flex slightly, but this does not affect wear.
• Does not shrink and holds the arch well.
• Requires a Rubber Base underlayer.
• Polymerization wavelength: 365–405 nm.
• Recommended UV/LED lamp power: 36–48 W.
• Permitted coating thickness: 0.5 mm at the free edge and 1 mm at the apex.
• Full polymerization time: 120 seconds.
• TPO FREE.

How to use – strengthening:

1. Remove the previous coating.
2. Do not file the nail shape, or leave approximately 2 mm of length, which will be removed after leveling.
3. Using a 220 grit file, lightly buff the surface of the nail without strong pressure, lifting the scales of the nail plate. A 100 grit buffer may also be used.
4. Perform the manicure.
5. If removers were used during the procedure, wash hands with soap after working with them.
6. Degrease the nail with Nail Prep LUNAmoon in two stages. Use 4 wipes, calculated as 1 wipe per 5 fingers. During the first stage, thoroughly wipe the nail surface. During the second stage, wrap a wipe around an orange stick and carefully clean the cuticle area and sidewalls.
7. Primer may be used if desired. If the base used as the underlayer has sufficient acidity, primer is not required.
8. Apply a Rubber Base LUNAmoon underlayer. It is best applied with a flat gel brush using rubbing movements. Carefully cover all nail sidewalls and cure in the lamp for 60 seconds.
9. Remove the sticky layer.
10. Perform leveling. When leveling with gel, leave a distance of 0.5–1 mm from the cuticle. Cure in the lamp for 60 seconds.
11. File the nail shape after leveling. This is necessary to create sufficient thickness at the edge of the nail to support the free edge.
12. If the natural nail is thin and tends to curl, be sure to file away approximately 1 mm of the natural nail from the underside. This helps prevent material lifting. If the material is rigid and the natural nail is very soft, the nail plate may begin to separate from the hard material at the free edge.
13. After filing, remove the sticky layer and apply gel polish.
14. Apply top coat and cure for 120 seconds. Do not wipe the coating after curing, as this may reduce its shine.

How to use – classic nail extension:

1. Remove the previous coating.
2. Shorten the natural nail to 1 mm and shape it into a rounded form.
3. Using a 220 grit file, lightly buff the surface of the nail without strong pressure, lifting the scales of the nail plate. A 100 grit buffer may also be used.
4. Perform the manicure.
5. If removers were used during the procedure, wash hands with soap after working with them.
6. Degrease the nail with Nail Prep LUNAmoon in two stages. Use 4 wipes, calculated as 1 wipe per 5 fingers. During the first stage, wipe the nail surface. During the second stage, wrap a wipe around an orange stick and carefully clean the cuticle area and sidewalls.
7. Use LUNAmoon primer.
8. Apply a Rubber Base LUNAmoon underlayer. A flat gel brush is recommended, using rubbing movements. Carefully cover all nail sidewalls and cure the material in the lamp for 60 seconds.
9. Remove the sticky layer.
10. Position the form for extending the free edge of the nail.
11. Use clear gel to build the shape of the artificial nail and cure for 30 seconds.
12. File the free edge and shape the nail as required.
13. Remove the sticky layer and excess dust.
14. Reapply Rubber Base LUNAmoon to the areas that were filed. Cure for 30 seconds.
15. Level with gel and place the nail in the lamp. Pinch at 10–15 seconds. If the gel has a strong sticky layer or contains glitter, pinch at 20 seconds.
16. Continue curing in the lamp for a total of 120 seconds.
17. Remove the sticky layer before applying gel polish.
18. Apply top coat and cure for 120 seconds. Do not wipe the coating after curing, as this may reduce its shine.

Precautions and important working conditions:

• Polymerization requires a 36–48 W UV/LED lamp with a wavelength of 365–405 nm.
• Observe the permitted coating thickness: 0.5 mm at the free edge and 1 mm at the apex.
• The material requires a Rubber Base underlayer.
• Take into account changes in the material consistency depending on temperature: the gel becomes thicker in cold conditions and more fluid in warmth.
• Do not wipe the coating after the final curing of the top coat in order to avoid reducing its shine.

Shelf life: 24 months. After opening, store for no longer than 18 months.

The product photo on the website may differ from the actual product.