The classic Premium extension gel is a polymer, light-curing material, which, due to its strength, makes it possible to significantly lengthen the nail plate.

The gel contains photoinitiators that start the polymerization process when the material is exposed to ultraviolet light of a certain wavelength.

• the wavelength for polymerization is 380-420 nm
• the power of the UV/Led lamp is 36-48W
• permissible coating thickness 0.5 mm at the end/ 1 mm at the apex
• complete polymerization 120 seconds

Features:

• acid free
• has shock absorption, does not crack when hit
• the consistency is medium-thick
• pigmentation is average, covers the free edge
• suitable for all extension techniques
• does not cause burning in the lamp
• thixotropic
• changes its consistency depending on the air temperature: it becomes thicker in the cold, thinner in the heat
• can be additionally heated to make the gel thinner
• when strengthening the nail plate with this gel, you need to file the natural nail
• does not shrink and holds the arch well
• a LUNAmoon Rubber Base is a must

Method of application during STRENGTHENING:

• withdrawal
• we do not dust the shape of the nail, or we leave a spare 2 mm in length, which we dust and take away after alignment.
• file the nail from above with a 220-grit saw without strong pressure, lifting the scales of the nail plate, or use a buff of 100 grit
• we do a manicure
• degrease the nail using Nail Prep LUNAmoon:
• you need to make two approaches
• we use 4 napkins, one napkin for 5 fingers
• the first approach: we wipe the surface of the nail
• second approach: take an orange stick, put on a napkin and wipe everything in the cuticle area and sinuses
• we use primers as desired, but if the base for the substrate has sufficient acidity, then primers are not needed
• lining with Rubber Base LUNAmoon :
• it is best to apply with a flat brush for gel, the movements should be rubbing, it is important to draw all the sinuses of the nail
• dry in a lamp for 60 seconds
• leveling, drying in a lamp for 120 seconds
•  sawdust of the form after alignment, this is necessary in order to form a thickness on the end that will hold the free edge
•  it is necessary to file a natural nail for better wearability; if this is not done, there will be peeling on the free edge of the nail
•  after sawing, wipe off the stickiness
•  cover with gel varnish if necessary
•  cover with LUNAmoon TOP and dry for 120 seconds
• after drying, do not wipe with anything, otherwise you can lose the shine

IMPORTANTLY:

if we work with removers, after using them, you need to wash your hands with soap and water

Application method for CLASSIC EXTENSION:

•  withdrawal
• take the length of the nail up to 1 mm and make a round shape of the free edge
•  with a file of 220 grit, file the nail from above without strong pressure, lifting the scales of the nail plate, or use a buff of 100 grit
•  manicure
• degrease the nail using Nail Prep LUNAmoon:
• you need to make two approaches
• we use 4 napkins, one napkin for 5 fingers
• the first approach: we wipe the surface of the nail
• second approach: take an orange stick, put on a napkin and wipe everything in the cuticle area and sinuses
•  Lunamoon primer (optional)
• lining with Rubber Base LUNAmoon :
• it is best to apply with a flat brush for gel, the movements should be rubbing, it is important to draw all the sinuses of the nail
• dry in a lamp for 60 seconds
•  erase stickiness
•  we put a form for building up the free edge
•  apply transparent gel to the shape of an artificial nail and dry it in a lamp for 60 seconds
•  dust the free edge and make the shape we need
•  wipe off stickiness and excess dust
•  apply LUNAmoon Rubber Base once again to the areas where you sawed and dry for 60 seconds
•  align with gel, put in the lamp and hold for 10-15 seconds and clamp; if the gel has a strong stickiness or contains glitter, you need to clamp it for 20-30 seconds
•  dry in a lamp for 120 seconds
•  before applying the gel polish, wipe off the stickiness
•  cover with LUNAmoon TOP and dry for 120 seconds
•  after drying, do not wipe with anything, otherwise you can lose the shine

IMPORTANTLY:

if we work with removers, after using them, you need to wash your hands with soap and water

The product is intended for professional use.