Acrylic gel is a versatile material that allows modeling on stencils or forms, providing a very natural look and correcting the architecture of natural nails. With this product, you can easily strengthen and repair nails, as well as repair edges or cracks. Due to its soft, self-leveling consistency, this material is easy to apply and requires no overspray. It is easily spread with a soft brush and liquid and did not burn during polymerization. Leaves a light sticky layer after curing.

Application technology:

1.    Do the usual nail preparation: remove the previous coating, buffer the surface, give the nails the desired shape and manicure.
2.    For extra grip, apply DNKa' Ultrabond acid-free primer.
3.    Apply a layer of DNKa rubber/fiber base with a rubbing motion. Curing in a UV lamp - 1 min., in an LED/hybrid lamp - 30 seconds.
4.    Pick up the necessary amount of DNKa' Acryl Gel with a spatula or an orange stick and apply it to the nail.
5.    With a brush soaked in degreaser, we spread the material on the nail plate with smoothing movements until it is perfectly smooth. Excess liquid on the brush, if necessary, wipe on a lint-free or paper towel.
6.    Curing in UV lamp - 2 minutes, LED / hybrid lamp - 60 seconds. Remove the dispersion layer with a degreaser.
7.    If necessary, we produce pollination. The nail is then ready for DNKa' Cover Base/DNKa' Builder Gel/DNKa' Gel Polish or DNKa' Top.
8.    Be sure to cut the nail in the middle. Even a 1 mm cut is sufficient for perfect wear of this coating.