• Deep and precise engraving for clear pattern transfer
• Suitable for fast nail art creation
• Allows complex designs without drawing skills
• Wide variety of patterns and designs
• Metal surface with detailed engraving
• Suitable for professional use
• Recommended for use with DARK STAMPING POLISH and DARK stamper

Directions for use:

1. Prepare the nails and apply base, gel or colour coating, then cure in a lamp.
2. If a sticky inhibition layer is present, remove it using DARK GEL CLEANSER.
3. Apply stamping polish to the plate, remove excess with a scraper and transfer the design onto the stamper.
4. Transfer the design from the stamper to the nail using a rolling or straight motion.
5. Seal with a top coat. If the top coat slides off the design, first apply a thin layer of clear base coat and then apply the top coat.

For clean image transfer it is important to work quickly, as stamping polish dries rapidly in the air. Proper technique helps achieve a clear and even result.

• Do not use thickened polish
• Apply polish to the plate in 1–2 movements
• Work with the scraper at approximately a 45° angle
• Do not apply excessive pressure to the scraper
• Work quickly, as the polish dries in the air
• Use a soft rolling motion to transfer the design
• Do not press the stamper firmly into the plate, as polish may remain inside the engraving

Precautions:

• Use the tool only for its intended purpose
• It is recommended to clean the plate surface before use
• Avoid strong mechanical impact on the engraved surface
• Clean polish residue from the plate after use
• Store in a dry place