The magnetic particles make it possible to create different highlight patterns, including vertical, horizontal, diagonal or more concentrated light effects. This allows the same shade to take on a different appearance depending on the chosen design.

• Magnetic Cat Eye effect.
• Expressive shifting highlight.
• The effect can be controlled by changing the position of the magnet.
• Suitable for vertical, horizontal and diagonal magnetic effects.
• Can be applied in one or two thin coats.
• Suitable for a variety of nail designs.

How to use:

1. Thoroughly degrease the nail surface with phBond dehydrator.
2. Apply Ultrabond acid-free primer to the free edge of the nail and wait until it has completely dried.
3. Apply a layer of clear Rubber Base and cure for 30 seconds.
4. Apply the gel polish in a thin layer, add a small drop of material and level it evenly.
5. Before curing, hold the magnet in the desired direction — vertically, horizontally or at an angle — for 3–5 seconds. Once the effect is formed, cure for 60 seconds.
6. If necessary, apply a second thin coat, create the magnetic highlight again and cure.
7. Finish with a top coat.

Precautions:

• For professional use only.
• Keep the open bottle and brush as far away from daylight as possible during use, especially from direct sunlight.
• Even on cloudy days, ultraviolet radiation passing through the clouds may be sufficient to start premature polymerization of the material.
• Do not leave the open product close to UV or LED light sources.