The tungsten carbide Avelia “Corn” bit with a red ring is designed for safe and controlled removal of artificial material. It provides stable performance without excessive heat and is suitable for everyday professional use.
The corn shape ensures smooth removal and reduces the risk of damage to the natural nail.• Red ring – medium-soft grit.• Ø6 mm diameter and 14.5 mm working length – optimal for both refills and full product removal.
Carbide Nail Drill Bit «Herringbone» Blue LUNAmoon - 4.1 mm
Blue Medium Carbide Fir Tree Nail Drill Bit, 4.1 mm is a professional e-file bit designed for efficient removal of artificial nail coatings, correction of nail extensions and filing of the nail arch. Its tapered cone-shaped head and narrow working tip make it easier to reach difficult areas and perform precise movements during nail sculpting. The medium cross-cut teeth provide smooth, even removal of soft, hard and hybrid nail coatings.
New
€16.95
Made from high-quality tungsten carbide, the bit offers excellent strength and wear resistance for intensive professional use. Its cross-cut teeth efficiently remove artificial material while helping reduce build-up on the cutting surface. The tapered shape and 2.3 mm working tip diameter allow precise filing of the nail arch, refinement of nail architecture and controlled work in areas requiring extra accuracy.
The bit is designed for use in the Forward rotation direction. Each bit undergoes a centring check to ensure smooth, stable operation with minimal vibration. Precision sharpening and durable tungsten carbide construction contribute to a long service life. According to the manufacturer, the bit offers 2–3 times greater wear resistance than standard drill bits. With proper technique, it helps minimise heat build-up on the nail plate and discomfort during coating removal.
Features:
- Tapered fir tree shape with a narrow working tip.
- Blue colour marking indicating medium grit.
- Cross-cut teeth for efficient, even material removal.
- Suitable for removing soft, hard and hybrid artificial nail coatings.
- Designed for nail extension correction and nail arch filing.
- Allows precise work in hard-to-reach areas.
- Smooth operation with minimal vibration.
- Cutting surface is less prone to material clogging.
- Helps prevent excessive nail plate heating when used correctly.
- Does not magnetically attract dust.
- Does not darken after sterilisation when recommended procedures are followed.
- High wear resistance and precision sharpening.
Technical specifications:
- Material: tungsten carbide.
- Shape: tapered fir tree, cone.
- Colour marking: blue.
- Grit: medium.
- Cutting pattern: cross-cut.
- Application: artificial coating removal, nail correction and nail arch filing.
- Suitable materials: soft, hard and hybrid nail coatings.
- Rotation direction: Forward.
- Recommended speed: 25,000–35,000 rpm.
- Cutting head length: 15.3 mm.
- Shank length: 34.8 mm.
- Working tip diameter: 2.3 mm.
- Diameter at the middle of the cutting head: 4.1 mm.
Care instructions:
- After each use, remove product residue with a dedicated cleaning brush.
- Clean the bit using a suitable drill bit cleaning solution or an ultrasonic cleaner.
- Disinfect according to the recommended solution concentration and contact time. Excessive concentrations may damage the tool.
- Make sure the bit is completely dry before dry-heat sterilisation. Do not exceed a sterilisation temperature of 180 °C.
Important: Intended for professional use. Control pressure and the position of the working tip when filing the nail arch or treating hard-to-reach areas. Avoid holding the rotating bit in one spot for too long and prevent direct contact between the cutting surface and the skin.
Delivery within Estonia:
SmartPost: 2.99€ (free delivery to a parcel terminal for orders over 40€)
Delivery within Finland:
Posti: 7.49€ (free delivery to a parcel machine for orders over 170€)
Delivery across Europe:
Check the price in your shopping cart or visit the delivery price page for more details.
The Avelia “Corn” carbide bit is a professional tool for electric manicure and pedicure. Designed for precise and gentle removal of gel polish, acrylic, and gel coatings, ensuring smooth and safe work without overheating the nail plate.
• Head diameter: 6 mm• Working part length: 14,5 mm• Grit: red (soft)• Material: tungsten carbide• Purpose: gentle removal of gel polish, acrylic, and gel• Shank diameter: φ2.34 mm• Suitable for sterilization and disinfection
The drill bit is designed for precise and clean hole-making in artificial nails before installing piercing rings. It ensures smooth drilling without chips or cracks, which is especially important for thin and long nail shapes.
The fine spiral cutting edge allows easy control over direction and depth, enabling fast and safe work.• Accurate work without damage thanks to the even geometry of the bit.• Narrow diameter is ideal for decorative rings and charms.• Compatible with most electric nail drills, making it convenient for salon or mobile use.
Previous
Next


