Made from high-quality tungsten carbide, the bit provides excellent strength and wear resistance for intensive professional use. Its longitudinal cross-cut teeth efficiently remove artificial coatings while reducing material build-up on the cutting surface. The safe rounded tip allows careful work near the cuticle and sidewalls, while the 5.9 mm cutting head diameter supports smooth and consistent product removal.

The bit is designed for use in the Forward rotation direction. Each bit undergoes a centring check to ensure stable operation with minimal vibration. Precision sharpening and durable tungsten carbide construction contribute to a long service life. According to the manufacturer, the bit offers 2–3 times greater wear resistance than standard drill bits. With proper technique, it helps minimise heat build-up on the nail plate and discomfort during coating removal.

Features:

• Corn-shaped cutting head with a safe rounded tip.
• Blue colour marking indicating medium grit.
• Longitudinal cross-cut teeth for fast, even material removal.
• Suitable for removing hard gel, acrylic and polygel.
• Designed for artificial coating removal and nail extension correction.
• Smooth operation with minimal vibration.
• Cutting surface is less prone to material clogging.
• Allows careful work near the cuticle and sidewalls.
• Helps prevent excessive nail plate heating when used correctly.
• Does not magnetically attract dust.
• Does not darken after sterilisation when recommended procedures are followed.
• High wear resistance and precision sharpening.

Technical specifications:

• Material: tungsten carbide.
• Shape: corn.
• Colour marking: blue.
• Grit: medium.
• Cutting pattern: longitudinal cross-cut.
• Application: hard artificial coating removal and nail correction.
• Suitable materials: gel, acrylic, polygel.
• Rotation direction: Forward.
• Recommended speed: 25,000–35,000 rpm.
• Cutting head length: 16 mm.
• Shank length: 34 mm.
• Diameter at the middle of the cutting head: 5.9 mm.

Care instructions:

1. After each use, remove product residue with a dedicated cleaning brush.
2. Clean the bit using a suitable drill bit cleaning solution or an ultrasonic cleaner.
3. Disinfect according to the recommended solution concentration and contact time. Excessive concentrations may damage the tool.
4. Make sure the bit is completely dry before dry-heat sterilisation. Do not exceed a sterilisation temperature of 180 °C.

Important: Intended for professional use. Control pressure and rotation speed when removing hard coatings, avoid holding the rotating bit in one spot for too long and do not use it to file the natural nail plate.