* Please note that the color of the product may slightly differ from the original due to display settings.

Carbide Nail Drill Bit «Corn» Yellow LUNAmoon - 5.0 mm

Yellow Fine Carbide Corn Nail Drill Bit is a professional e-file bit designed for exceptionally gentle removal of soft artificial nail coatings and smoothing their surface. Its corn-shaped cutting head and extra-fine cross-cut teeth provide smooth, even removal of gel polish and camouflage base coats without jerking or excessive vibration.

New
Product ID 4820295811367 Category Carbide drill bits Brand Lunamoon Delivery Time 2-4 days
€16.95

Made from high-quality tungsten carbide, the bit offers excellent strength and wear resistance for long-term professional use. Its extra-fine cross-cut teeth allow precise control when removing thin and soft coatings, while the safe rounded tip supports careful work around sensitive areas. The optimised cutting head diameter provides smooth movement across the material and helps minimise the risk of damaging the natural nail.

The bit is intended for use in the Forward rotation direction. Each bit undergoes a centring check to ensure smooth and stable operation. Precision sharpening and durable tungsten carbide construction contribute to a long service life. According to the manufacturer, the bit provides 2–3 times greater wear resistance than standard drill bits. With proper technique, it helps prevent excessive heat build-up on the nail plate and discomfort during coating removal.

Features:

  • Corn-shaped cutting head with a safe rounded tip.
  • Yellow colour marking indicating extra-fine grit.
  • Extra-fine cross-cut teeth for gentle coating removal.
  • Suitable for removing gel polish and camouflage base coats.
  • Designed for soft artificial coating removal and surface smoothing.
  • Smooth operation with minimal vibration.
  • Helps prevent excessive nail plate heating when used correctly.
  • Resists material clogging and does not magnetically attract dust.
  • Does not darken after sterilisation when recommended procedures are followed.
  • High wear resistance and precision sharpening.
  • Rotation direction: Forward.

Technical specifications:

  • Material: tungsten carbide.
  • Shape: corn.
  • Colour marking: yellow.
  • Grit: extra-fine.
  • Cutting pattern: cross-cut.
  • Application: soft artificial coating removal and surface smoothing.
  • Suitable materials: gel polish and camouflage base coats.
  • Rotation direction: Forward.
  • Recommended speed: 25,000–35,000 rpm.
  • Cutting head length: 15.1 mm.
  • Shank length: 36.2 mm.
  • Diameter at the middle of the cutting head: 5 mm.

Care instructions:

  1. After each use, remove product residue with a dedicated cleaning brush.
  2. Clean the bit using a suitable drill bit cleaning solution or an ultrasonic cleaner.
  3. Disinfect according to the recommended solution concentration and contact time. Excessive concentrations may damage the tool.
  4. Make sure the bit is completely dry before dry-heat sterilisation. Do not exceed a sterilisation temperature of 180 °C.

Important: Intended for professional use. Control pressure and rotation speed during coating removal, avoid holding the rotating bit in one spot for too long and do not use it for aggressive filing of the natural nail plate.

Delivery within Estonia:
SmartPost: 2.99€ (free delivery to a parcel terminal for orders over 40€)

Delivery within Finland:
Posti: 7.49€ (free delivery to a parcel machine for orders over 170€)

Delivery across Europe:

Check the price in your shopping cart or visit the delivery price page for more details.