* Please note that the color of the product may slightly differ from the original due to display settings.

Carbide Nail Drill Bit «Corn» Hard Green LUNAmoon (L) - 5.0 mm

Hard Green (L) Carbide Corn Nail Drill Bit for Left-Handed Use is a professional e-file bit designed for fast, efficient removal of artificial nail coatings and correction of nail extensions. Its rounded corn-shaped head and cross-cut teeth provide smooth, even material removal without jerking or excessive vibration. The bit is suitable for removing hard gels, polygels and hybrid coatings, including liquid builder gels.

New
Product ID 4820295813231 Category Carbide drill bits Brand Lunamoon Delivery Time 2-4 days
€16.95

Made from high-quality tungsten carbide, the bit offers excellent strength and wear resistance for intensive professional use. Its cross-cut teeth support faster removal of artificial coatings while reducing material build-up on the cutting surface. The rounded tip allows careful work near the cuticle and sidewalls when the correct technique is used.

Hard Green (L) is designed for left-handed nail technicians and operates in the Reverse rotation direction. Each bit undergoes a centring check to ensure smooth, stable rotation. Precise sharpening and durable tungsten carbide construction contribute to a long service life. According to the manufacturer, the bit offers 2–3 times greater wear resistance than standard drill bits. With proper technique, it helps minimise heat build-up on the nail plate and discomfort during product removal.

Features:

  • Corn-shaped cutting head with a rounded tip.
  • Designed for left-handed use in Reverse rotation.
  • Green colour marking for effective artificial material removal.
  • Cross-cut teeth for fast, even coating removal.
  • Suitable for hard gels, polygels and hybrid coatings.
  • Smooth operation with minimal vibration.
  • Helps prevent excessive nail plate heating when used correctly.
  • Resists material clogging and does not magnetically attract dust.
  • Does not darken after sterilisation when recommended procedures are followed.
  • High wear resistance and precision sharpening.

Technical specifications:

  • Material: tungsten carbide.
  • Shape: corn.
  • Colour marking: green.
  • Grit: medium (as specified by the manufacturer).
  • Cutting pattern: cross-cut.
  • Application: artificial coating removal and nail correction.
  • Rotation direction: Reverse, for left-handed use.
  • Recommended speed: 25,000–35,000 rpm.
  • Cutting head length: 13 mm.
  • Shank length: 34 mm.
  • Tip diameter: 3 mm.
  • Diameter at the middle of the cutting head: 5 mm.

Care instructions:

  1. After each use, remove product residue with a dedicated cleaning brush.
  2. Clean the bit using a suitable drill bit cleaning solution or an ultrasonic cleaner.
  3. Disinfect according to the recommended solution concentration and contact time. Excessive concentrations may damage the tool.
  4. Make sure the bit is completely dry before dry-heat sterilisation. Do not exceed a sterilisation temperature of 180 °C.

Important: Intended for professional use. Work only on artificial nail material, select an appropriate speed for the coating being removed and avoid holding the rotating bit in one spot for too long.

Delivery within Estonia:
SmartPost: 2.99€ (free delivery to a parcel terminal for orders over 40€)

Delivery within Finland:
Posti: 7.49€ (free delivery to a parcel machine for orders over 170€)

Delivery across Europe:

Check the price in your shopping cart or visit the delivery price page for more details.