Candy Colored Builder Gel - is a polymeric light-curing material whose strength allows significant nail-plate extension. It contains photoinitiators that trigger polymerization when exposed to ultraviolet light of a specific wavelength.

Features:

• Acid-free.
• Shock-absorbing, does not crack on impact.
• Medium viscosity.
• Medium pigmentation, covers the free edge.
• Suitable for “no-file” extensions.
• Compatible with dual forms.
• No burning sensation in the lamp.
• Thickens in cold, becomes thinner when warm.
• Thixotropic — flows more when the brush moves.
• Can be pre-warmed for extra fluidity.
• Rigid at 1 mm; thinner than 1 mm may flex slightly without affecting wear.
• No shrinkage, keeps the arch well.
• Requires a Rubber Base underlay.
• Curing wavelength — 380–420 nm.
• UV/LED lamp power — 36–48 W.
• Recommended layer: 0.5 mm at tip / 1 mm at apex.
• Full cure — 120 s.

Application method:

1. Remove old product.
2. Do not file the shape, or leave 2 mm length to remove after leveling.
3. Lightly buff the surface with a 220-grit file or 100-grit buffer to raise the keratin scales.
4. Perform manicure.
5. If removers were used, wash hands with soap.
6. Degrease with Nail Prep LUNAmoon twice (4 wipes):
7. First pass — wipe nail surface;
8. Second pass — wrap a wipe around an orange stick and clean cuticle and sidewalls.
9. Primer optional; if the base coat is sufficiently acidic, skip it.
10. Apply Rubber Base LUNAmoon with a flat gel brush, rubbing motions, covering sidewalls; cure 60 s.
11. Remove tacky layer.
12. Level with gel, staying 0.5–1 mm from cuticle; cure 60 s.
13. Shape the edge after leveling to create thickness at the tip.
14. If the natural nail is thin and curls, file 1 mm of natural nail from beneath to prevent lift-off.
15. Wipe dispersion layer and apply gel polish color.
16. Apply top coat, cure 120 s; do not wipe afterwards to keep the shine.