DNKa Builder Gel is a versatile and convenient modeling gel. Low temperature, medium consistency, therefore evenly distributed and self-levelling. It is used in single-phase and three-phase systems. The gel allows you to create a durable coating, build the right architecture and work without dust. Perfectly holds the arch and is not deformed. Suitable for extensions on lower forms, extensions using the technique without / with minimal pollination, extension correction, modeling of the nail plate and strengthening nails.
Nail Extension Gel Builder Gel DNKa No. 0002 Angel Thicker - 30 ml
A new level of control, stability and modeling precision – discover DNKa’ Builder Gel #0002 Angel Thicker.
DNKa’ Builder Gel #0002 Angel Thicker is a professional three-phase builder gel with a thick consistency, high pigmentation and thixotropic properties. Its low-temperature formula provides more comfortable polymerization when the recommended application technology is followed.
The gel is characterized by high strength and stability, making it ideal for creating durable nail architecture of various lengths. The material effectively maintains the created shape, stabilizes the C-curve and tunnel, demonstrates high resistance to mechanical stress and helps preserve the strength and durability of modeled nails throughout wear.
Thanks to its intense white color and increased density, the gel is ideal for nail extensions using lower and upper forms, corrections, advanced architectural modeling, creating avant-garde and competition shapes, as well as designs using the structural French technique.
Key benefits:
- Consistency: thick.
- Pigmentation: 95–98%.
- Working comfort: the thixotropic effect provides full control over the material during modeling.
- Polymerization: low-temperature formula for a more comfortable curing process.
- Properties: hard, durable material that ensures architectural stability after curing.
- Purpose: modeling, extension, strengthening of the natural nail plate, correction and repair.
Application instructions – natural nail strengthening technique:
- Perform standard mechanical preparation of the natural nail plate. Clean the surface with DNKa’ 3 in 1 Nail Prep & Cleanser.
- Using a slightly drained brush, apply a thin, even layer of DNKa’ Dehydrator to the natural nail plate. Allow to air dry for 30–60 seconds.
- In the same way, apply a thin layer of DNKa’ Ultrabond. Allow to air dry for 30–60 seconds. Avoid contact of the product with the skin and periungual folds.
- Apply a clear DNKa’ Multi Base or DNKa’ Fiber Base and cure in the lamp.
- Strengthen the nail using DNKa’ Builder Gel #0002 Angel Thicker, creating the appropriate nail architecture. Cure in a 48/36 W LED/UV lamp for 120/240 seconds.
- Remove the inhibition layer with DNKa’ Nail Prep & Cleanser.
- If necessary, refine the shape with a nail file, apply the selected DNKa’ Top and cure in a 48/36 W LED/UV lamp for 120 seconds. After polymerization is complete, allow the material to cool completely for approximately 2 minutes.
- Complete the treatment by applying care products according to the client's needs.
Application instructions – nail modeling and extension technique:
- Perform standard mechanical preparation of the natural nail plate. Clean the surface with DNKa’ 3 in 1 Nail Prep & Cleanser.
- To improve adhesion, apply DNKa’ Dehydrator followed by DNKa’ Ultrabond.
- Apply a clear DNKa’ Multi Base or DNKa’ Fiber Base and cure in the lamp.
- Position the selected extension form – lower or upper.
- Use DNKa’ Builder Gel #0002 Angel Thicker to model the nail extension and achieve the desired nail length.
- Cure in a 48/36 W LED/UV lamp for 120/240 seconds.
- Remove the form and, if necessary, continue modeling the nail architecture according to the selected technique. If the thickness of the applied material exceeds 1–1.5 mm, it is recommended to build the nail in two layers, fully curing each layer.
- Perform the final polymerization in a 48/36 W LED/UV lamp for 120/240 seconds.
- Remove the inhibition layer with DNKa’ Nail Prep & Cleanser. If necessary, refine the shape with a nail file and apply the selected DNKa’ Top.
The stated result can be achieved when the product is used as part of the complete DNKa’ system and in accordance with the recommended application technology.
Composition: ACRYLATES COPOLYMER, HYDROXYPROPYL METHACRYLATE, ISOBORNYL ACRYLATE, ETHYL TRIMETHYLBENZOYL PHENYLPHOSPHINATE, HYDROXYCYCLOHEXYL PHENYL KETONE, SILICA, +/- MICA, CI 45380, CI 15850, CI 77491, CI 15985, CI 77492, CI 77007, CI 77742, CI 77499, CI 77891, CI 7700.
The manufacturer may change the product composition. The information about the ingredients may be inaccurate.
Precautions:
- Avoid contact of DNKa’ Ultrabond with the skin and periungual folds.
- Follow the recommended application and polymerization technology for the material.
- When modeling layers thicker than 1–1.5 mm, apply the material in two layers, fully curing each layer.
Delivery within Estonia:
SmartPost: 2.99€ (free delivery to a parcel terminal for orders over 40€)
Delivery within Finland:
Posti: 7.49€ (free delivery to a parcel machine for orders over 170€)
Delivery across Europe:
Check the price in your shopping cart or visit the delivery price page for more details.
Builder Gel Basic is a collection of 10 trendy shades of gels designed for nail sculpting and strengthening. Soft beige, brown and pink tones with a creamy self-leveling consistency make the product comfortable to work with for technicians of any skill level.
The gel has medium viscosity, 60–90% pigmentation depending on the application layer, and provides excellent adhesion, making it suitable for strengthening, leveling and sculpting. The material remains strong, versatile in work and is ideal for French designs or as a standalone nude coating.
DNKa Builder Gel is a versatile and convenient modeling gel. Low temperature, medium consistency, therefore evenly distributed and self-levelling. It is used in single-phase and three-phase systems. The gel allows you to create a durable coating, build the right architecture and work without dust. Perfectly holds the arch and is not deformed. Suitable for extensions on lower forms, extensions using the technique without / with minimal pollination, extension correction, modeling of the nail plate and strengthening nails.
Previous
Next

