The vivid palette is designed for both eye-catching single-color manicures and creative nail designs. Each shade can be used individually, combined with other colors within one nail look, or mixed together to create custom shades.

Builder Gel Dopamine has a medium-thick consistency, a high level of adhesion, and is compatible with other DNKa’ products. The material is hard, strong, and versatile, making it suitable for different strengthening and modeling techniques. Pigmentation varies according to the thickness of the applied layer and ranges from 50% to 90%.

• Consistency: medium-thick.
• Pigmentation: 50–90% depending on the thickness of the applied layer.
• High level of adhesion.
• Compatible with other DNKa’ products.
• Hard, strong, and versatile material.
• Suitable for strengthening natural nails.
• Designed for modeling and nail extensions.
• Shades can be combined or mixed together.

The collection includes 9 intense shades:

• #0050 — lime.
• #0051 — neon lemon.
• #0052 — juicy orange.
• #0053 — intense peach.
• #0054 — coral pink.
• #0055 — intense raspberry.
• #0056 — grape purple.
• #0057 — ultramarine blue.
• #0058 — intense red.

Method of use — strengthening natural nails:

1. Perform standard mechanical preparation of the nail plate. Clean the nail with DNKa’ Nail Prep & Cleanser 3 in 1.
2. Using a damp brush, after removing excess product on the edge of the bottle, apply one thin and even layer of DNKa’ Dehydrator to the natural nail plate. Allow to air-dry for 30–60 seconds.
3. Using a damp brush, after removing excess product on the edge of the bottle, apply one thin and even layer of DNKa’ Ultrabond to the natural nail plate. Allow to air-dry for 30–60 seconds. Avoid contact with the skin and nail folds to help prevent product flooding and subsequent lifting of the polymer material.
4. Apply a transparent DNKa’ base coat. Multi Base or Fiber Base is recommended. Cure in the lamp.
5. Apply a leveling layer using the selected Builder Gel shade and form an even, correctly structured nail surface. Cure in a 48/36 W LED/UV lamp for 120/240 seconds.
6. Remove the inhibition layer with DNKa’ Nail Prep & Cleanser 3 in 1.
7. If necessary, file the nail into the desired shape and apply the selected DNKa’ Top. Cure in a 48/36 W LED/UV lamp for 120 seconds. After curing, allow the nail coating to cool for 2 minutes.
8. Complete the procedure with selected care products according to the client’s preferences.

Method of use — modeling and extensions:

1. Perform standard mechanical preparation of the nail plate. Clean the nail with DNKa’ Nail Prep & Cleanser 3 in 1.
2. Apply DNKa’ Dehydrator to the nail plate.
3. Apply DNKa’ Ultrabond to improve adhesion of the material.
4. Apply a transparent DNKa’ base coat. Multi Base or Fiber Base is recommended. Cure in the lamp.
5. Select the appropriate modeling form — lower or upper form.
6. Model the nail extension using the selected shade of DNKa’ Builder Gel.
7. Cure in a 48 W LED/UV lamp for 120/240 seconds.
8. Remove the form and, if required by the selected technique, create the correct nail architecture.
9. Cure again in a 48/36 W LED/UV lamp for 120/240 seconds.
10. Remove the inhibition layer with DNKa’ Nail Prep & Cleanser 3 in 1.
11. If necessary, file the nail and finish with the selected DNKa’ Top.

Ingredients: ACRYLATES COPOLYMER, HYDROXYPROPYL METHACRYLATE, ISOBORNYL ACRYLATE, ETHYL TRIMETHYLBENZOYL PHENYLPHOSPHINATE, HYDROXYCYCLOHEXYL PHENYL KETONE, SILICA, +/- MICA, CI 45380, CI 15850, CI 77491, CI 15985, CI 77492, CI 77007, CI 77742, CI 77499, CI 77891, CI 77000

The manufacturer may change the product formulation. Ingredient information may be inaccurate.